A37U-15.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MIL-DTL-9813C

1. SCOPE

1.1 Scope. This specification cover the performance requirements for an externally

mounted gunnery tow target system, designated A/A37U-15.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are cited in sections 3 and 4 of

this specification. This section does not include documents specified in other sections of

this specification or recommended for additional information or as examples. While

every effort has been made to ensure the completeness of this list, document users are

cautioned that they must meet all specified requirement documents cited in section 3

and 4 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications,

standards, and handbooks form a part of this document to the extent specified herein.

Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-T-9918 (Inactive)

Tow Target, Aerial Dart Gunnery Type TDU-10B

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-810

Environmental Engineering Consideration

MIL-STD-8591

Airborne Stores, Suspension Equipment &

Aircraft-Store Interface (Carriage Phase)

(Copies of these documents are available online at

https://www.assist.daps.dla.mil.online/start/ or from the Standardization Document Order

Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following

other Government documents, drawings, and publications form a part of this document

to the extent specified herein. Unless otherwise specified, the issues of these

documents are those cited in the solicitation or contract.

AIR FORCE DRAWINGS

61J10536

Target Reel, Model 29C2

61J10905

Rewind Stand, THU � 4/E

(Copies of the drawings are available from 510CBSS/GBHAA, 6020 Gum Lane, Hill

AFB, UT 84056-5825.)